Frequently Asked Questions

Quick answers to the questions researchers ask most often

Everything researchers commonly contact us about, explained clearly in one place.

---

🛡 Are products independently tested?

Yes. Every batch is independently verified through Janoshik Analytical HPLC testing.

All products supplied undergo third-party HPLC analysis by Janoshik Analytical, a Czech laboratory specialising in peptide and compound verification that is independent from us. Reported purity levels consistently exceed 99%.

Where a current batch Janoshik Certificate of Analysis (COA) is available, a printed copy is included with the order. If a report has not been issued for that batch, the verification record is published on our Purity page.

Each COA includes a unique verification key that can be authenticated through Janoshik’s official verification system, allowing researchers to confirm the results independently.

We provide transparent guidance on how to interpret Janoshik HPLC reports.

---

💧 BAC water + powder reconstitution guide

Follow these four preparation steps:

1. Clean the vial

Use an alcohol prep wipe from the supplied kit to clean the vial surface. Allow it to dry completely.

2. Draw BAC water

Using an insulin syringe, withdraw 2 mL of bacteriostatic water through the rubber stopper of the BAC water vial.

3. Add the diluent slowly

Inject the BAC water gradually along the inside wall of the vial. Avoid spraying directly onto the lyophilised powder.

4. Dissolve carefully

Gently swirl the vial until fully dissolved. Do not shake. Allow approximately 30 seconds for complete dissolution before refrigeration.

The reconstitution card included inside the box lid can be used as a quick reference.

---

💉 Pen instructions: needle attachment, priming and dose dial

Attach a new needle

Clean the pen tip with an alcohol wipe and attach a fresh foil-wrapped needle securely.

Prime the pen

Dial one click, hold the pen upright and press the dose button. A small droplet appearing at the needle tip confirms that the pen is primed and air has been removed.

Select the research setting

Each dial click represents a fixed increment based on calibration. Typical resolution is 0.5–1 mg per click, with the dose window displaying the selected amount.

Example: a 6 mg research setting may require approximately 6–12 clicks depending on calibration.

Research administration route

Published research protocols describe subcutaneous administration routes, including areas such as the abdomen, thigh and upper arm. Researchers typically rotate locations throughout study procedures.

Storage after use

Dispose of the needle in an appropriate sharps container. Replace the pen cap and return the device to refrigerated storage.

Each pen provides the number of uses specified for the selected format. Once empty, replace the cartridge while continuing to use the same pen body.

Research use only. Procedures are based on published research protocols and are not medical guidance or instructions for human use.

---

❄ Storage: lyophilised and reconstituted material

Lyophilised vial

• Stable for 24+ months
• Store at 2–8°C
• Keep sealed and protected from light
• Do not freeze

Reconstituted solution

• Store at 2–8°C
• Keep in the original glass vial
• Avoid shaking
• Discard if cloudy or discoloured
• Typical storage period: approximately 30 days

BAC water

After opening, refrigerate and use within approximately 30 days.

---

📍 Research administration information

Published scientific literature involving Adipotide (FTPP) describes research administration routes used in experimental studies, including subcutaneous administration approaches.

Researchers commonly rotate administration sites during study procedures.

This information is provided only as background from peer-reviewed research literature. It does not represent dosing instructions, medical advice or recommendations for human use.

Reference: Barnhart et al. 2011

---

🎯 Which research protocol should be followed?

The appropriate approach is to follow the relevant published research protocol.

Research involving Adipotide uses structured study designs with defined progression stages. Researchers typically begin with earlier research phases before moving through subsequent stages according to their study requirements.

Researchers already familiar with the compound can review available protocol information to determine suitable product format, quantity and study duration.

For non-standard research requirements, contact our team before ordering. We can help identify the most appropriate format based on your planned research schedule.

Research use only. Information is derived from peer-reviewed literature and provided for research context only. It is not medical or human-use guidance.

Reference: Barnhart et al. 2011

---

Key Information

Category	Details
Compound	Adipotide
Research Category	Metabolic Research
Available Sizes	2 mg, 5 mg, 10 mg
Pricing	From £50
Format	Lyophilised powder in sealed vial
Purity	>99% HPLC verified by Janoshik Analytical
Intended Use	In-vitro laboratory research only. Not for human consumption

---

Chemical & Reference Data

Information below is compiled from public scientific databases and peer-reviewed literature for laboratory research and characterisation purposes.

Property	Information
Compound Class	Synthetic proapoptotic peptidomimetic (FTPP – Fat-Targeted Pro-apoptotic Peptide)
Molecular Formula	Conjugated peptide
Molecular Weight	Approximately 3370 g/mol
CAS Registry Number	N/A
Number of Residues	25
Amino Acid Sequence	CKGGRAKDC-GG-(KLAKLAK)₂ conjugate
Mechanism	Prohibitin-1 / ANXA2-targeting peptide described in research literature
Reported Half-life	Short serum half-life reported in preclinical studies
Solubility	Suitable for laboratory reconstitution using bacteriostatic water
Storage (Lyophilised)	2–8°C; stable for 18+ months
Storage (Reconstituted)	2–8°C; follow laboratory storage requirements
Research Status	Preclinical / investigational

---

Research Profile

• Synthetic peptidomimetic compound
• Investigated in adipose-vasculature models
• Contains prohibitin-binding sequence
• Independently purity tested
• Research use only

Adipotide (FTPP) is a synthetic peptidomimetic compound described in preclinical literature for its interaction with prohibitin-related targets in adipose vasculature models.

It is supplied as a lyophilised powder intended exclusively for in-vitro laboratory research.

The information above describes scientific characterisation from published literature and does not represent claims regarding effects in humans.

---

Laboratory Handling

Adipotide is supplied as a freeze-dried powder in a sealed glass vial.

For laboratory preparation, add the required volume of diluent slowly along the inside wall of the vial. Gently swirl until fully dissolved. Do not vortex or shake.

Prepared solutions should be stored at 2–8°C and protected from light.

Use the Reconstitution Volume Calculator to determine the final concentration in mg/mL.

State	Temperature	Typical Shelf Life
Lyophilised	2–8°C or -20°C	Up to 24 months
Reconstituted	2–8°C	Approximately 4–6 weeks

---

Purity & Verification

Every batch of Adipotide supplied undergoes independent HPLC verification by Janoshik Analytical.

Where a Janoshik report is available for the current batch, it is supplied with the order and includes a unique verification key that can be authenticated against Janoshik’s records.

Reported purity consistently exceeds 99%.

---

Related Research Compounds

Researchers studying Adipotide commonly investigate related metabolic research compounds, including:

• AOD9604 – Metabolic Research
• 5-Amino-1MQ – Metabolic Research
• AICAR – Metabolic Research